[ May  8 16:55:03 Enabled. ]
[ May  8 16:55:03 Rereading configuration. ]
[ May  8 16:55:04 Rereading configuration. ]
[ May  8 16:55:07 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.180575135Z","hostname":"oxz_crucible_73c98d00-7d97-4607-af60-1e05d1903fda","pid":22454,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.189336491Z","hostname":"oxz_crucible_73c98d00-7d97-4607-af60-1e05d1903fda","pid":22454,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.203291637Z","hostname":"oxz_crucible_73c98d00-7d97-4607-af60-1e05d1903fda","pid":22454}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.208824956Z","hostname":"oxz_crucible_73c98d00-7d97-4607-af60-1e05d1903fda","pid":22454}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.214993093Z","hostname":"oxz_crucible_73c98d00-7d97-4607-af60-1e05d1903fda","pid":22454,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.680004202Z","hostname":"oxz_crucible_73c98d00-7d97-4607-af60-1e05d1903fda","pid":22454,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.692611162Z","hostname":"oxz_crucible_73c98d00-7d97-4607-af60-1e05d1903fda","pid":22454,"zonename":"\"oxz_crucible_73c98d00-7d97-4607-af60-1e05d1903fda\""}
[ May  8 16:55:07 Method "start" exited with status 0. ]