[ May  8 19:10:59 Enabled. ]
[ May  8 19:10:59 Rereading configuration. ]
[ May  8 19:11:01 Rereading configuration. ]
[ May  8 19:11:03 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T19:11:04.187655388Z","hostname":"oxz_crucible_02a464e1-982e-4f42-98db-90e161c73add","pid":22591,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T19:11:04.207895287Z","hostname":"oxz_crucible_02a464e1-982e-4f42-98db-90e161c73add","pid":22591,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T19:11:04.228107416Z","hostname":"oxz_crucible_02a464e1-982e-4f42-98db-90e161c73add","pid":22591}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T19:11:04.236940728Z","hostname":"oxz_crucible_02a464e1-982e-4f42-98db-90e161c73add","pid":22591}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T19:11:04.245728409Z","hostname":"oxz_crucible_02a464e1-982e-4f42-98db-90e161c73add","pid":22591,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T19:11:04.711585023Z","hostname":"oxz_crucible_02a464e1-982e-4f42-98db-90e161c73add","pid":22591,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T19:11:04.723446462Z","hostname":"oxz_crucible_02a464e1-982e-4f42-98db-90e161c73add","pid":22591,"zonename":"\"oxz_crucible_02a464e1-982e-4f42-98db-90e161c73add\""}
[ May  8 19:11:04 Method "start" exited with status 0. ]