[ May  8 22:37:03 Enabled. ]
[ May  8 22:37:03 Rereading configuration. ]
[ May  8 22:37:07 Rereading configuration. ]
[ May  8 22:37:12 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T22:37:12.296082384Z","hostname":"oxz_crucible_f6d4f185-3be1-4078-a533-5c5e7388cef1","pid":24205,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T22:37:12.303870803Z","hostname":"oxz_crucible_f6d4f185-3be1-4078-a533-5c5e7388cef1","pid":24205,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T22:37:12.313295727Z","hostname":"oxz_crucible_f6d4f185-3be1-4078-a533-5c5e7388cef1","pid":24205}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T22:37:12.318342294Z","hostname":"oxz_crucible_f6d4f185-3be1-4078-a533-5c5e7388cef1","pid":24205}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T22:37:12.322506337Z","hostname":"oxz_crucible_f6d4f185-3be1-4078-a533-5c5e7388cef1","pid":24205,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T22:37:12.779395768Z","hostname":"oxz_crucible_f6d4f185-3be1-4078-a533-5c5e7388cef1","pid":24205,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T22:37:12.795199049Z","hostname":"oxz_crucible_f6d4f185-3be1-4078-a533-5c5e7388cef1","pid":24205,"zonename":"\"oxz_crucible_f6d4f185-3be1-4078-a533-5c5e7388cef1\""}
[ May  8 22:37:12 Method "start" exited with status 0. ]