[ May 11 15:40:14 Enabled. ]
[ May 11 15:40:14 Rereading configuration. ]
[ May 11 15:40:15 Rereading configuration. ]
[ May 11 15:40:18 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T15:40:18.694088111Z","hostname":"oxz_crucible_19110046-f247-4468-b75f-fc4855a74b29","pid":21837,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T15:40:18.705807696Z","hostname":"oxz_crucible_19110046-f247-4468-b75f-fc4855a74b29","pid":21837,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T15:40:18.718464788Z","hostname":"oxz_crucible_19110046-f247-4468-b75f-fc4855a74b29","pid":21837}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T15:40:18.725141869Z","hostname":"oxz_crucible_19110046-f247-4468-b75f-fc4855a74b29","pid":21837}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T15:40:18.731223673Z","hostname":"oxz_crucible_19110046-f247-4468-b75f-fc4855a74b29","pid":21837,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T15:40:19.189084949Z","hostname":"oxz_crucible_19110046-f247-4468-b75f-fc4855a74b29","pid":21837,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T15:40:19.200698281Z","hostname":"oxz_crucible_19110046-f247-4468-b75f-fc4855a74b29","pid":21837,"zonename":"\"oxz_crucible_19110046-f247-4468-b75f-fc4855a74b29\""}
[ May 11 15:40:19 Method "start" exited with status 0. ]