[ May 11 19:06:22 Enabled. ]
[ May 11 19:06:22 Rereading configuration. ]
[ May 11 19:06:24 Rereading configuration. ]
[ May 11 19:06:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T19:06:27.886832912Z","hostname":"oxz_crucible_54a85b66-e86f-43ff-a413-db66fa82cb8e","pid":25223,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T19:06:27.895295458Z","hostname":"oxz_crucible_54a85b66-e86f-43ff-a413-db66fa82cb8e","pid":25223,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T19:06:27.905757256Z","hostname":"oxz_crucible_54a85b66-e86f-43ff-a413-db66fa82cb8e","pid":25223}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T19:06:27.910209944Z","hostname":"oxz_crucible_54a85b66-e86f-43ff-a413-db66fa82cb8e","pid":25223}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T19:06:27.914612551Z","hostname":"oxz_crucible_54a85b66-e86f-43ff-a413-db66fa82cb8e","pid":25223,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T19:06:28.372913654Z","hostname":"oxz_crucible_54a85b66-e86f-43ff-a413-db66fa82cb8e","pid":25223,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-11T19:06:28.388773564Z","hostname":"oxz_crucible_54a85b66-e86f-43ff-a413-db66fa82cb8e","pid":25223,"zonename":"\"oxz_crucible_54a85b66-e86f-43ff-a413-db66fa82cb8e\""}
[ May 11 19:06:28 Method "start" exited with status 0. ]