[ May 13 18:37:14 Enabled. ]
[ May 13 18:37:14 Rereading configuration. ]
[ May 13 18:37:16 Rereading configuration. ]
[ May 13 18:37:19 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T18:37:19.122443162Z","hostname":"oxz_oximeter_46e2e677-a583-4884-ba4e-de183ad2802b","pid":22122,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T18:37:19.134555365Z","hostname":"oxz_oximeter_46e2e677-a583-4884-ba4e-de183ad2802b","pid":22122,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T18:37:19.147493803Z","hostname":"oxz_oximeter_46e2e677-a583-4884-ba4e-de183ad2802b","pid":22122}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T18:37:19.15641319Z","hostname":"oxz_oximeter_46e2e677-a583-4884-ba4e-de183ad2802b","pid":22122}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T18:37:19.163914862Z","hostname":"oxz_oximeter_46e2e677-a583-4884-ba4e-de183ad2802b","pid":22122,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T18:37:19.628022753Z","hostname":"oxz_oximeter_46e2e677-a583-4884-ba4e-de183ad2802b","pid":22122,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T18:37:19.640283489Z","hostname":"oxz_oximeter_46e2e677-a583-4884-ba4e-de183ad2802b","pid":22122,"zonename":"\"oxz_oximeter_46e2e677-a583-4884-ba4e-de183ad2802b\""}
[ May 13 18:37:19 Method "start" exited with status 0. ]