[ May 13 20:54:55 Enabled. ]
[ May 13 20:54:55 Rereading configuration. ]
[ May 13 20:54:56 Rereading configuration. ]
[ May 13 20:54:59 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.216268979Z","hostname":"oxz_crucible_2eb1b7c3-6abf-4638-856e-00b7c2fc66ee","pid":22895,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.230224777Z","hostname":"oxz_crucible_2eb1b7c3-6abf-4638-856e-00b7c2fc66ee","pid":22895,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.241615245Z","hostname":"oxz_crucible_2eb1b7c3-6abf-4638-856e-00b7c2fc66ee","pid":22895}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.246491043Z","hostname":"oxz_crucible_2eb1b7c3-6abf-4638-856e-00b7c2fc66ee","pid":22895}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.252385239Z","hostname":"oxz_crucible_2eb1b7c3-6abf-4638-856e-00b7c2fc66ee","pid":22895,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.713322513Z","hostname":"oxz_crucible_2eb1b7c3-6abf-4638-856e-00b7c2fc66ee","pid":22895,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.721791799Z","hostname":"oxz_crucible_2eb1b7c3-6abf-4638-856e-00b7c2fc66ee","pid":22895,"zonename":"\"oxz_crucible_2eb1b7c3-6abf-4638-856e-00b7c2fc66ee\""}
[ May 13 20:54:59 Method "start" exited with status 0. ]