[ May 13 20:54:54 Enabled. ]
[ May 13 20:54:54 Rereading configuration. ]
[ May 13 20:54:56 Rereading configuration. ]
[ May 13 20:54:59 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.293053504Z","hostname":"oxz_crucible_a6097adc-5b27-4810-9743-3fc47f40fa79","pid":22937,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.301915103Z","hostname":"oxz_crucible_a6097adc-5b27-4810-9743-3fc47f40fa79","pid":22937,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.312680687Z","hostname":"oxz_crucible_a6097adc-5b27-4810-9743-3fc47f40fa79","pid":22937}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.316683118Z","hostname":"oxz_crucible_a6097adc-5b27-4810-9743-3fc47f40fa79","pid":22937}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.321374284Z","hostname":"oxz_crucible_a6097adc-5b27-4810-9743-3fc47f40fa79","pid":22937,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.784072082Z","hostname":"oxz_crucible_a6097adc-5b27-4810-9743-3fc47f40fa79","pid":22937,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-13T20:54:59.793702556Z","hostname":"oxz_crucible_a6097adc-5b27-4810-9743-3fc47f40fa79","pid":22937,"zonename":"\"oxz_crucible_a6097adc-5b27-4810-9743-3fc47f40fa79\""}
[ May 13 20:54:59 Method "start" exited with status 0. ]