[ May 14 16:25:46 Enabled. ]
[ May 14 16:25:46 Rereading configuration. ]
[ May 14 16:25:48 Rereading configuration. ]
[ May 14 16:25:50 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.645737376Z","hostname":"oxz_crucible_b69afb20-49de-4e57-8768-6c70a6c6eb16","pid":22644,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.654356067Z","hostname":"oxz_crucible_b69afb20-49de-4e57-8768-6c70a6c6eb16","pid":22644,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.667181802Z","hostname":"oxz_crucible_b69afb20-49de-4e57-8768-6c70a6c6eb16","pid":22644}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.673058164Z","hostname":"oxz_crucible_b69afb20-49de-4e57-8768-6c70a6c6eb16","pid":22644}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.678155188Z","hostname":"oxz_crucible_b69afb20-49de-4e57-8768-6c70a6c6eb16","pid":22644,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:51.140053755Z","hostname":"oxz_crucible_b69afb20-49de-4e57-8768-6c70a6c6eb16","pid":22644,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:51.153218944Z","hostname":"oxz_crucible_b69afb20-49de-4e57-8768-6c70a6c6eb16","pid":22644,"zonename":"\"oxz_crucible_b69afb20-49de-4e57-8768-6c70a6c6eb16\""}
[ May 14 16:25:51 Method "start" exited with status 0. ]