[ May 14 16:25:46 Enabled. ]
[ May 14 16:25:46 Rereading configuration. ]
[ May 14 16:25:47 Rereading configuration. ]
[ May 14 16:25:49 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.056675757Z","hostname":"oxz_oximeter_f425f625-5662-4b5b-a108-1e38cb01f1db","pid":22411,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.066367929Z","hostname":"oxz_oximeter_f425f625-5662-4b5b-a108-1e38cb01f1db","pid":22411,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.079568728Z","hostname":"oxz_oximeter_f425f625-5662-4b5b-a108-1e38cb01f1db","pid":22411}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.085221108Z","hostname":"oxz_oximeter_f425f625-5662-4b5b-a108-1e38cb01f1db","pid":22411}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.093370604Z","hostname":"oxz_oximeter_f425f625-5662-4b5b-a108-1e38cb01f1db","pid":22411,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.555920838Z","hostname":"oxz_oximeter_f425f625-5662-4b5b-a108-1e38cb01f1db","pid":22411,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-14T16:25:50.5674947Z","hostname":"oxz_oximeter_f425f625-5662-4b5b-a108-1e38cb01f1db","pid":22411,"zonename":"\"oxz_oximeter_f425f625-5662-4b5b-a108-1e38cb01f1db\""}
[ May 14 16:25:50 Method "start" exited with status 0. ]