| 1 | | [ May 16 04:30:51 Enabled. ] |
| 2 | | [ May 16 04:30:51 Rereading configuration. ] |
| 3 | | [ May 16 04:30:51 Rereading configuration. ] |
| 4 | | [ May 16 04:30:54 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-05-16T04:30:54.436Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService10
|
| 7 | 2026-05-16T04:30:54.448Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService10
|
| 8 | 2026-05-16T04:30:54.464Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-05-16T04:30:54.471Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-05-16T04:30:54.482Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService10"
static address = fd00:1122:3344:101::16
|
| 11 | 2026-05-16T04:30:54.939Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-05-16T04:30:54.955Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_1155e1a0-1997-4312-86d8-c9cd52afd02b"
|
| 13 | | [ May 16 04:30:54 Method "start" exited with status 0. ] |