[ May 16 04:30:51 Enabled. ]
[ May 16 04:30:51 Rereading configuration. ]
[ May 16 04:30:52 Rereading configuration. ]
[ May 16 04:30:54 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:30:54.693538107Z","hostname":"oxz_crucible_dd5068ec-ef00-4c73-9428-fb67ddf083e5","pid":25263,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:30:54.705084803Z","hostname":"oxz_crucible_dd5068ec-ef00-4c73-9428-fb67ddf083e5","pid":25263,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:30:54.717456569Z","hostname":"oxz_crucible_dd5068ec-ef00-4c73-9428-fb67ddf083e5","pid":25263}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:30:54.723845258Z","hostname":"oxz_crucible_dd5068ec-ef00-4c73-9428-fb67ddf083e5","pid":25263}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:30:54.729518028Z","hostname":"oxz_crucible_dd5068ec-ef00-4c73-9428-fb67ddf083e5","pid":25263,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:30:55.201505761Z","hostname":"oxz_crucible_dd5068ec-ef00-4c73-9428-fb67ddf083e5","pid":25263,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:30:55.214444172Z","hostname":"oxz_crucible_dd5068ec-ef00-4c73-9428-fb67ddf083e5","pid":25263,"zonename":"\"oxz_crucible_dd5068ec-ef00-4c73-9428-fb67ddf083e5\""}
[ May 16 04:30:55 Method "start" exited with status 0. ]