[ May 16 04:27:40 Enabled. ]
[ May 16 04:27:40 Rereading configuration. ]
[ May 16 04:27:40 Rereading configuration. ]
[ May 16 04:27:41 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:27:41.318856464Z","hostname":"oxz_ntp_28557ab0-c024-4588-8aa6-d6e225c5d262","pid":6422,"datalink":"oxControlService4"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:27:41.323765966Z","hostname":"oxz_ntp_28557ab0-c024-4588-8aa6-d6e225c5d262","pid":6422,"datalink":"oxControlService4"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:27:41.329792625Z","hostname":"oxz_ntp_28557ab0-c024-4588-8aa6-d6e225c5d262","pid":6422}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:27:41.332960874Z","hostname":"oxz_ntp_28557ab0-c024-4588-8aa6-d6e225c5d262","pid":6422}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:27:41.335984008Z","hostname":"oxz_ntp_28557ab0-c024-4588-8aa6-d6e225c5d262","pid":6422,"static address":"fd00:1122:3344:101::1b","data link":"\"oxControlService4\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:27:41.790283763Z","hostname":"oxz_ntp_28557ab0-c024-4588-8aa6-d6e225c5d262","pid":6422,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-16T04:27:41.79540718Z","hostname":"oxz_ntp_28557ab0-c024-4588-8aa6-d6e225c5d262","pid":6422,"zonename":"\"oxz_ntp_28557ab0-c024-4588-8aa6-d6e225c5d262\""}
[ May 16 04:27:41 Method "start" exited with status 0. ]