[ May 18 07:16:15 Enabled. ]
[ May 18 07:16:15 Rereading configuration. ]
[ May 18 07:16:17 Rereading configuration. ]
[ May 18 07:16:20 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T07:16:20.424219735Z","hostname":"oxz_crucible_80d09246-7f55-4b14-bd7c-e5e33c25e912","pid":25906,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T07:16:20.433850748Z","hostname":"oxz_crucible_80d09246-7f55-4b14-bd7c-e5e33c25e912","pid":25906,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T07:16:20.446716119Z","hostname":"oxz_crucible_80d09246-7f55-4b14-bd7c-e5e33c25e912","pid":25906}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T07:16:20.452191089Z","hostname":"oxz_crucible_80d09246-7f55-4b14-bd7c-e5e33c25e912","pid":25906}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T07:16:20.460412834Z","hostname":"oxz_crucible_80d09246-7f55-4b14-bd7c-e5e33c25e912","pid":25906,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T07:16:20.922895199Z","hostname":"oxz_crucible_80d09246-7f55-4b14-bd7c-e5e33c25e912","pid":25906,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T07:16:20.936590205Z","hostname":"oxz_crucible_80d09246-7f55-4b14-bd7c-e5e33c25e912","pid":25906,"zonename":"\"oxz_crucible_80d09246-7f55-4b14-bd7c-e5e33c25e912\""}
[ May 18 07:16:20 Method "start" exited with status 0. ]