[ May 18 18:21:42 Enabled. ]
[ May 18 18:21:42 Rereading configuration. ]
[ May 18 18:21:44 Rereading configuration. ]
[ May 18 18:21:46 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:46.986238735Z","hostname":"oxz_crucible_34de16f5-8cac-4c1f-adc6-f42b6166c61e","pid":22371,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:46.993911302Z","hostname":"oxz_crucible_34de16f5-8cac-4c1f-adc6-f42b6166c61e","pid":22371,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.006283109Z","hostname":"oxz_crucible_34de16f5-8cac-4c1f-adc6-f42b6166c61e","pid":22371}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.012701776Z","hostname":"oxz_crucible_34de16f5-8cac-4c1f-adc6-f42b6166c61e","pid":22371}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.018805292Z","hostname":"oxz_crucible_34de16f5-8cac-4c1f-adc6-f42b6166c61e","pid":22371,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.483463804Z","hostname":"oxz_crucible_34de16f5-8cac-4c1f-adc6-f42b6166c61e","pid":22371,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.494445497Z","hostname":"oxz_crucible_34de16f5-8cac-4c1f-adc6-f42b6166c61e","pid":22371,"zonename":"\"oxz_crucible_34de16f5-8cac-4c1f-adc6-f42b6166c61e\""}
[ May 18 18:21:47 Method "start" exited with status 0. ]