[ May 18 18:21:43 Enabled. ]
[ May 18 18:21:43 Rereading configuration. ]
[ May 18 18:21:44 Rereading configuration. ]
[ May 18 18:21:47 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.360248202Z","hostname":"oxz_crucible_350eebf5-0448-4d6c-bd75-e8ca351adbeb","pid":22517,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.370028766Z","hostname":"oxz_crucible_350eebf5-0448-4d6c-bd75-e8ca351adbeb","pid":22517,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.384024306Z","hostname":"oxz_crucible_350eebf5-0448-4d6c-bd75-e8ca351adbeb","pid":22517}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.389713679Z","hostname":"oxz_crucible_350eebf5-0448-4d6c-bd75-e8ca351adbeb","pid":22517}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.397315474Z","hostname":"oxz_crucible_350eebf5-0448-4d6c-bd75-e8ca351adbeb","pid":22517,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.856430887Z","hostname":"oxz_crucible_350eebf5-0448-4d6c-bd75-e8ca351adbeb","pid":22517,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T18:21:47.868744173Z","hostname":"oxz_crucible_350eebf5-0448-4d6c-bd75-e8ca351adbeb","pid":22517,"zonename":"\"oxz_crucible_350eebf5-0448-4d6c-bd75-e8ca351adbeb\""}
[ May 18 18:21:47 Method "start" exited with status 0. ]