[ May 18 23:58:53 Enabled. ]
[ May 18 23:58:53 Rereading configuration. ]
[ May 18 23:58:55 Rereading configuration. ]
[ May 18 23:58:58 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:58.4145158Z","hostname":"oxz_crucible_3a6cfe1b-17da-486d-b437-f1b5a77a695c","pid":21900,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:58.422637063Z","hostname":"oxz_crucible_3a6cfe1b-17da-486d-b437-f1b5a77a695c","pid":21900,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:58.433026308Z","hostname":"oxz_crucible_3a6cfe1b-17da-486d-b437-f1b5a77a695c","pid":21900}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:58.44009562Z","hostname":"oxz_crucible_3a6cfe1b-17da-486d-b437-f1b5a77a695c","pid":21900}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:58.444810278Z","hostname":"oxz_crucible_3a6cfe1b-17da-486d-b437-f1b5a77a695c","pid":21900,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:58.904157427Z","hostname":"oxz_crucible_3a6cfe1b-17da-486d-b437-f1b5a77a695c","pid":21900,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:58.916092658Z","hostname":"oxz_crucible_3a6cfe1b-17da-486d-b437-f1b5a77a695c","pid":21900,"zonename":"\"oxz_crucible_3a6cfe1b-17da-486d-b437-f1b5a77a695c\""}
[ May 18 23:58:58 Method "start" exited with status 0. ]