[ May 18 23:58:56 Enabled. ]
[ May 18 23:58:56 Rereading configuration. ]
[ May 18 23:58:57 Rereading configuration. ]
[ May 18 23:58:59 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:59.932986502Z","hostname":"oxz_crucible_3edee0ed-ab94-4fdb-90d8-9d1faa8a0ec9","pid":22477,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:59.941375897Z","hostname":"oxz_crucible_3edee0ed-ab94-4fdb-90d8-9d1faa8a0ec9","pid":22477,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:59.952862173Z","hostname":"oxz_crucible_3edee0ed-ab94-4fdb-90d8-9d1faa8a0ec9","pid":22477}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:59.957387549Z","hostname":"oxz_crucible_3edee0ed-ab94-4fdb-90d8-9d1faa8a0ec9","pid":22477}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:59.962489681Z","hostname":"oxz_crucible_3edee0ed-ab94-4fdb-90d8-9d1faa8a0ec9","pid":22477,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:59:00.421783609Z","hostname":"oxz_crucible_3edee0ed-ab94-4fdb-90d8-9d1faa8a0ec9","pid":22477,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:59:00.432420627Z","hostname":"oxz_crucible_3edee0ed-ab94-4fdb-90d8-9d1faa8a0ec9","pid":22477,"zonename":"\"oxz_crucible_3edee0ed-ab94-4fdb-90d8-9d1faa8a0ec9\""}
[ May 18 23:59:00 Method "start" exited with status 0. ]