[ May 18 23:58:53 Enabled. ]
[ May 18 23:58:53 Rereading configuration. ]
[ May 18 23:58:54 Rereading configuration. ]
[ May 18 23:58:56 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:57.098007246Z","hostname":"oxz_oximeter_3c91cdf3-d15f-472e-966a-08f3de817b63","pid":20716,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:57.108626614Z","hostname":"oxz_oximeter_3c91cdf3-d15f-472e-966a-08f3de817b63","pid":20716,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:57.141407786Z","hostname":"oxz_oximeter_3c91cdf3-d15f-472e-966a-08f3de817b63","pid":20716}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:57.148888162Z","hostname":"oxz_oximeter_3c91cdf3-d15f-472e-966a-08f3de817b63","pid":20716}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:57.155952394Z","hostname":"oxz_oximeter_3c91cdf3-d15f-472e-966a-08f3de817b63","pid":20716,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:57.617640597Z","hostname":"oxz_oximeter_3c91cdf3-d15f-472e-966a-08f3de817b63","pid":20716,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-18T23:58:57.63168796Z","hostname":"oxz_oximeter_3c91cdf3-d15f-472e-966a-08f3de817b63","pid":20716,"zonename":"\"oxz_oximeter_3c91cdf3-d15f-472e-966a-08f3de817b63\""}
[ May 18 23:58:57 Method "start" exited with status 0. ]