[ May 19 01:31:46 Enabled. ]
[ May 19 01:31:46 Rereading configuration. ]
[ May 19 01:31:47 Rereading configuration. ]
[ May 19 01:31:48 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:48.884040212Z","hostname":"oxz_crucible_09f4f0eb-7e5f-4a3e-b8d7-bd91ecb8d733","pid":23231,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:48.891577751Z","hostname":"oxz_crucible_09f4f0eb-7e5f-4a3e-b8d7-bd91ecb8d733","pid":23231,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:48.900340485Z","hostname":"oxz_crucible_09f4f0eb-7e5f-4a3e-b8d7-bd91ecb8d733","pid":23231}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:48.904682752Z","hostname":"oxz_crucible_09f4f0eb-7e5f-4a3e-b8d7-bd91ecb8d733","pid":23231}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:48.908967489Z","hostname":"oxz_crucible_09f4f0eb-7e5f-4a3e-b8d7-bd91ecb8d733","pid":23231,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:49.365563262Z","hostname":"oxz_crucible_09f4f0eb-7e5f-4a3e-b8d7-bd91ecb8d733","pid":23231,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:49.373532117Z","hostname":"oxz_crucible_09f4f0eb-7e5f-4a3e-b8d7-bd91ecb8d733","pid":23231,"zonename":"\"oxz_crucible_09f4f0eb-7e5f-4a3e-b8d7-bd91ecb8d733\""}
[ May 19 01:31:49 Method "start" exited with status 0. ]