[ May 19 01:31:40 Enabled. ]
[ May 19 01:31:40 Rereading configuration. ]
[ May 19 01:31:41 Rereading configuration. ]
[ May 19 01:31:44 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:44.717730473Z","hostname":"oxz_crucible_d0d4e47f-709f-43cd-b4b6-adbbc507f258","pid":21217,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:44.726464338Z","hostname":"oxz_crucible_d0d4e47f-709f-43cd-b4b6-adbbc507f258","pid":21217,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:44.738390544Z","hostname":"oxz_crucible_d0d4e47f-709f-43cd-b4b6-adbbc507f258","pid":21217}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:44.746034704Z","hostname":"oxz_crucible_d0d4e47f-709f-43cd-b4b6-adbbc507f258","pid":21217}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:44.751394854Z","hostname":"oxz_crucible_d0d4e47f-709f-43cd-b4b6-adbbc507f258","pid":21217,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:45.213319438Z","hostname":"oxz_crucible_d0d4e47f-709f-43cd-b4b6-adbbc507f258","pid":21217,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T01:31:45.224365913Z","hostname":"oxz_crucible_d0d4e47f-709f-43cd-b4b6-adbbc507f258","pid":21217,"zonename":"\"oxz_crucible_d0d4e47f-709f-43cd-b4b6-adbbc507f258\""}
[ May 19 01:31:45 Method "start" exited with status 0. ]