[ May 19 02:42:15 Enabled. ]
[ May 19 02:42:15 Rereading configuration. ]
[ May 19 02:42:16 Rereading configuration. ]
[ May 19 02:42:19 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.248546248Z","hostname":"oxz_crucible_0d96a7ed-3f4c-4a49-9b52-7e5122095e23","pid":22210,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.258217927Z","hostname":"oxz_crucible_0d96a7ed-3f4c-4a49-9b52-7e5122095e23","pid":22210,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.268486082Z","hostname":"oxz_crucible_0d96a7ed-3f4c-4a49-9b52-7e5122095e23","pid":22210}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.273594675Z","hostname":"oxz_crucible_0d96a7ed-3f4c-4a49-9b52-7e5122095e23","pid":22210}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.278226482Z","hostname":"oxz_crucible_0d96a7ed-3f4c-4a49-9b52-7e5122095e23","pid":22210,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.736580076Z","hostname":"oxz_crucible_0d96a7ed-3f4c-4a49-9b52-7e5122095e23","pid":22210,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.752361568Z","hostname":"oxz_crucible_0d96a7ed-3f4c-4a49-9b52-7e5122095e23","pid":22210,"zonename":"\"oxz_crucible_0d96a7ed-3f4c-4a49-9b52-7e5122095e23\""}
[ May 19 02:42:19 Method "start" exited with status 0. ]