[ May 19 02:42:15 Enabled. ]
[ May 19 02:42:15 Rereading configuration. ]
[ May 19 02:42:16 Rereading configuration. ]
[ May 19 02:42:19 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.236894248Z","hostname":"oxz_crucible_44acb57e-0183-4bbb-a438-dc48c861832e","pid":22206,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.244579887Z","hostname":"oxz_crucible_44acb57e-0183-4bbb-a438-dc48c861832e","pid":22206,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.253720991Z","hostname":"oxz_crucible_44acb57e-0183-4bbb-a438-dc48c861832e","pid":22206}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.259999795Z","hostname":"oxz_crucible_44acb57e-0183-4bbb-a438-dc48c861832e","pid":22206}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.265276009Z","hostname":"oxz_crucible_44acb57e-0183-4bbb-a438-dc48c861832e","pid":22206,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.726221749Z","hostname":"oxz_crucible_44acb57e-0183-4bbb-a438-dc48c861832e","pid":22206,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:19.739572406Z","hostname":"oxz_crucible_44acb57e-0183-4bbb-a438-dc48c861832e","pid":22206,"zonename":"\"oxz_crucible_44acb57e-0183-4bbb-a438-dc48c861832e\""}
[ May 19 02:42:19 Method "start" exited with status 0. ]