[ May 19 02:42:19 Enabled. ]
[ May 19 02:42:19 Rereading configuration. ]
[ May 19 02:42:20 Rereading configuration. ]
[ May 19 02:42:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:21.281131374Z","hostname":"oxz_crucible_53d0d8a1-3f9b-4a77-9f53-f7818fa22a5e","pid":23034,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:21.287410719Z","hostname":"oxz_crucible_53d0d8a1-3f9b-4a77-9f53-f7818fa22a5e","pid":23034,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:21.296582003Z","hostname":"oxz_crucible_53d0d8a1-3f9b-4a77-9f53-f7818fa22a5e","pid":23034}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:21.300689415Z","hostname":"oxz_crucible_53d0d8a1-3f9b-4a77-9f53-f7818fa22a5e","pid":23034}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:21.305557555Z","hostname":"oxz_crucible_53d0d8a1-3f9b-4a77-9f53-f7818fa22a5e","pid":23034,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:21.764268172Z","hostname":"oxz_crucible_53d0d8a1-3f9b-4a77-9f53-f7818fa22a5e","pid":23034,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:21.774869671Z","hostname":"oxz_crucible_53d0d8a1-3f9b-4a77-9f53-f7818fa22a5e","pid":23034,"zonename":"\"oxz_crucible_53d0d8a1-3f9b-4a77-9f53-f7818fa22a5e\""}
[ May 19 02:42:21 Method "start" exited with status 0. ]