[ May 19 02:42:14 Enabled. ]
[ May 19 02:42:14 Rereading configuration. ]
[ May 19 02:42:15 Rereading configuration. ]
[ May 19 02:42:18 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:18.446383477Z","hostname":"oxz_oximeter_b9f16f04-a924-4e6f-bdc7-ace73c0080d3","pid":21646,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:18.454387289Z","hostname":"oxz_oximeter_b9f16f04-a924-4e6f-bdc7-ace73c0080d3","pid":21646,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:18.468693546Z","hostname":"oxz_oximeter_b9f16f04-a924-4e6f-bdc7-ace73c0080d3","pid":21646}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:18.474063301Z","hostname":"oxz_oximeter_b9f16f04-a924-4e6f-bdc7-ace73c0080d3","pid":21646}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:18.479607728Z","hostname":"oxz_oximeter_b9f16f04-a924-4e6f-bdc7-ace73c0080d3","pid":21646,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:18.939059112Z","hostname":"oxz_oximeter_b9f16f04-a924-4e6f-bdc7-ace73c0080d3","pid":21646,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T02:42:18.953105337Z","hostname":"oxz_oximeter_b9f16f04-a924-4e6f-bdc7-ace73c0080d3","pid":21646,"zonename":"\"oxz_oximeter_b9f16f04-a924-4e6f-bdc7-ace73c0080d3\""}
[ May 19 02:42:18 Method "start" exited with status 0. ]