[ May 19 16:47:41 Enabled. ]
[ May 19 16:47:41 Rereading configuration. ]
[ May 19 16:47:41 Rereading configuration. ]
[ May 19 16:47:44 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:44.716966466Z","hostname":"oxz_crucible_7a4b671f-7cad-4162-8db4-84bc8b360646","pid":22019,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:44.724545121Z","hostname":"oxz_crucible_7a4b671f-7cad-4162-8db4-84bc8b360646","pid":22019,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:44.737255584Z","hostname":"oxz_crucible_7a4b671f-7cad-4162-8db4-84bc8b360646","pid":22019}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:44.742814979Z","hostname":"oxz_crucible_7a4b671f-7cad-4162-8db4-84bc8b360646","pid":22019}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:44.749719614Z","hostname":"oxz_crucible_7a4b671f-7cad-4162-8db4-84bc8b360646","pid":22019,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:45.219297794Z","hostname":"oxz_crucible_7a4b671f-7cad-4162-8db4-84bc8b360646","pid":22019,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:45.240293233Z","hostname":"oxz_crucible_7a4b671f-7cad-4162-8db4-84bc8b360646","pid":22019,"zonename":"\"oxz_crucible_7a4b671f-7cad-4162-8db4-84bc8b360646\""}
[ May 19 16:47:45 Method "start" exited with status 0. ]