[ May 19 16:47:41 Enabled. ]
[ May 19 16:47:41 Rereading configuration. ]
[ May 19 16:47:42 Rereading configuration. ]
[ May 19 16:47:45 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:45.556997289Z","hostname":"oxz_oximeter_6dadac23-54e2-417b-9f43-be5a809f2f45","pid":22406,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:45.564135897Z","hostname":"oxz_oximeter_6dadac23-54e2-417b-9f43-be5a809f2f45","pid":22406,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:45.573985779Z","hostname":"oxz_oximeter_6dadac23-54e2-417b-9f43-be5a809f2f45","pid":22406}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:45.578171351Z","hostname":"oxz_oximeter_6dadac23-54e2-417b-9f43-be5a809f2f45","pid":22406}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:45.582393645Z","hostname":"oxz_oximeter_6dadac23-54e2-417b-9f43-be5a809f2f45","pid":22406,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:46.050971269Z","hostname":"oxz_oximeter_6dadac23-54e2-417b-9f43-be5a809f2f45","pid":22406,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T16:47:46.067852815Z","hostname":"oxz_oximeter_6dadac23-54e2-417b-9f43-be5a809f2f45","pid":22406,"zonename":"\"oxz_oximeter_6dadac23-54e2-417b-9f43-be5a809f2f45\""}
[ May 19 16:47:46 Method "start" exited with status 0. ]