[ May 19 22:08:35 Enabled. ]
[ May 19 22:08:35 Rereading configuration. ]
[ May 19 22:08:37 Rereading configuration. ]
[ May 19 22:08:39 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T22:08:39.201235579Z","hostname":"oxz_crucible_81e85974-f6bb-4029-aef2-c8cab3b5a734","pid":23151,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T22:08:39.212481945Z","hostname":"oxz_crucible_81e85974-f6bb-4029-aef2-c8cab3b5a734","pid":23151,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T22:08:39.223888246Z","hostname":"oxz_crucible_81e85974-f6bb-4029-aef2-c8cab3b5a734","pid":23151}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T22:08:39.229690789Z","hostname":"oxz_crucible_81e85974-f6bb-4029-aef2-c8cab3b5a734","pid":23151}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T22:08:39.234055007Z","hostname":"oxz_crucible_81e85974-f6bb-4029-aef2-c8cab3b5a734","pid":23151,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T22:08:39.693110729Z","hostname":"oxz_crucible_81e85974-f6bb-4029-aef2-c8cab3b5a734","pid":23151,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-19T22:08:39.706778374Z","hostname":"oxz_crucible_81e85974-f6bb-4029-aef2-c8cab3b5a734","pid":23151,"zonename":"\"oxz_crucible_81e85974-f6bb-4029-aef2-c8cab3b5a734\""}
[ May 19 22:08:39 Method "start" exited with status 0. ]