[ May 20 17:09:14 Enabled. ]
[ May 20 17:09:14 Rereading configuration. ]
[ May 20 17:09:17 Rereading configuration. ]
[ May 20 17:09:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:09:21.301133227Z","hostname":"oxz_oximeter_8136b6c8-3aaf-4313-9b9c-348a27a6cbf6","pid":25105,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:09:21.302297545Z","hostname":"oxz_oximeter_8136b6c8-3aaf-4313-9b9c-348a27a6cbf6","pid":25105,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:09:21.313552913Z","hostname":"oxz_oximeter_8136b6c8-3aaf-4313-9b9c-348a27a6cbf6","pid":25105}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:09:21.318009049Z","hostname":"oxz_oximeter_8136b6c8-3aaf-4313-9b9c-348a27a6cbf6","pid":25105}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:09:21.322682961Z","hostname":"oxz_oximeter_8136b6c8-3aaf-4313-9b9c-348a27a6cbf6","pid":25105,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:09:21.788454227Z","hostname":"oxz_oximeter_8136b6c8-3aaf-4313-9b9c-348a27a6cbf6","pid":25105,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:09:21.799483775Z","hostname":"oxz_oximeter_8136b6c8-3aaf-4313-9b9c-348a27a6cbf6","pid":25105,"zonename":"\"oxz_oximeter_8136b6c8-3aaf-4313-9b9c-348a27a6cbf6\""}
[ May 20 17:09:21 Method "start" exited with status 0. ]