[ May 20 17:43:26 Enabled. ]
[ May 20 17:43:26 Rereading configuration. ]
[ May 20 17:43:28 Rereading configuration. ]
[ May 20 17:43:31 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:43:32.202078381Z","hostname":"oxz_crucible_6a59fbaa-0e8c-4814-830e-6efc55188734","pid":23784,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:43:32.206404524Z","hostname":"oxz_crucible_6a59fbaa-0e8c-4814-830e-6efc55188734","pid":23784,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:43:32.218482139Z","hostname":"oxz_crucible_6a59fbaa-0e8c-4814-830e-6efc55188734","pid":23784}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:43:32.223130421Z","hostname":"oxz_crucible_6a59fbaa-0e8c-4814-830e-6efc55188734","pid":23784}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:43:32.226679564Z","hostname":"oxz_crucible_6a59fbaa-0e8c-4814-830e-6efc55188734","pid":23784,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:43:32.693607356Z","hostname":"oxz_crucible_6a59fbaa-0e8c-4814-830e-6efc55188734","pid":23784,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-20T17:43:32.721072903Z","hostname":"oxz_crucible_6a59fbaa-0e8c-4814-830e-6efc55188734","pid":23784,"zonename":"\"oxz_crucible_6a59fbaa-0e8c-4814-830e-6efc55188734\""}
[ May 20 17:43:32 Method "start" exited with status 0. ]