[ May 21 01:32:06 Enabled. ]
[ May 21 01:32:06 Rereading configuration. ]
[ May 21 01:32:08 Rereading configuration. ]
[ May 21 01:32:12 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:12.665246603Z","hostname":"oxz_crucible_333bed6e-c8db-410f-9d30-12a9f5fac1a5","pid":23668,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:12.670173681Z","hostname":"oxz_crucible_333bed6e-c8db-410f-9d30-12a9f5fac1a5","pid":23668,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:12.679549477Z","hostname":"oxz_crucible_333bed6e-c8db-410f-9d30-12a9f5fac1a5","pid":23668}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:12.683745111Z","hostname":"oxz_crucible_333bed6e-c8db-410f-9d30-12a9f5fac1a5","pid":23668}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:12.688169709Z","hostname":"oxz_crucible_333bed6e-c8db-410f-9d30-12a9f5fac1a5","pid":23668,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:13.156499346Z","hostname":"oxz_crucible_333bed6e-c8db-410f-9d30-12a9f5fac1a5","pid":23668,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:13.168452764Z","hostname":"oxz_crucible_333bed6e-c8db-410f-9d30-12a9f5fac1a5","pid":23668,"zonename":"\"oxz_crucible_333bed6e-c8db-410f-9d30-12a9f5fac1a5\""}
[ May 21 01:32:13 Method "start" exited with status 0. ]