[ May 21 01:32:06 Enabled. ]
[ May 21 01:32:06 Rereading configuration. ]
[ May 21 01:32:07 Rereading configuration. ]
[ May 21 01:32:11 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:11.670566413Z","hostname":"oxz_crucible_2df8831e-9673-449a-8636-077eb61a933c","pid":23125,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:11.677070452Z","hostname":"oxz_crucible_2df8831e-9673-449a-8636-077eb61a933c","pid":23125,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:11.688183214Z","hostname":"oxz_crucible_2df8831e-9673-449a-8636-077eb61a933c","pid":23125}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:11.692832516Z","hostname":"oxz_crucible_2df8831e-9673-449a-8636-077eb61a933c","pid":23125}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:11.698474339Z","hostname":"oxz_crucible_2df8831e-9673-449a-8636-077eb61a933c","pid":23125,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:12.170162703Z","hostname":"oxz_crucible_2df8831e-9673-449a-8636-077eb61a933c","pid":23125,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T01:32:12.186727513Z","hostname":"oxz_crucible_2df8831e-9673-449a-8636-077eb61a933c","pid":23125,"zonename":"\"oxz_crucible_2df8831e-9673-449a-8636-077eb61a933c\""}
[ May 21 01:32:12 Method "start" exited with status 0. ]