[ May 21 09:16:18 Enabled. ]
[ May 21 09:16:18 Rereading configuration. ]
[ May 21 09:16:19 Rereading configuration. ]
[ May 21 09:16:22 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T09:16:22.730028059Z","hostname":"oxz_oximeter_2c603a77-0330-4afa-bb86-4159fdb0c257","pid":24816,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T09:16:22.739554408Z","hostname":"oxz_oximeter_2c603a77-0330-4afa-bb86-4159fdb0c257","pid":24816,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T09:16:22.752326886Z","hostname":"oxz_oximeter_2c603a77-0330-4afa-bb86-4159fdb0c257","pid":24816}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T09:16:22.75753091Z","hostname":"oxz_oximeter_2c603a77-0330-4afa-bb86-4159fdb0c257","pid":24816}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T09:16:22.762467896Z","hostname":"oxz_oximeter_2c603a77-0330-4afa-bb86-4159fdb0c257","pid":24816,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T09:16:23.224071801Z","hostname":"oxz_oximeter_2c603a77-0330-4afa-bb86-4159fdb0c257","pid":24816,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T09:16:23.238146853Z","hostname":"oxz_oximeter_2c603a77-0330-4afa-bb86-4159fdb0c257","pid":24816,"zonename":"\"oxz_oximeter_2c603a77-0330-4afa-bb86-4159fdb0c257\""}
[ May 21 09:16:23 Method "start" exited with status 0. ]