[ May 21 10:09:12 Enabled. ]
[ May 21 10:09:12 Rereading configuration. ]
[ May 21 10:09:12 Rereading configuration. ]
[ May 21 10:09:23 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService6 -s fd00:1122:3344:101::4 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:09:23.578048742Z","hostname":"oxz_cockroachdb_a41aeb8f-293b-4abf-a847-99155ca70925","pid":10418,"datalink":"oxControlService6"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:09:23.584002717Z","hostname":"oxz_cockroachdb_a41aeb8f-293b-4abf-a847-99155ca70925","pid":10418,"datalink":"oxControlService6"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:09:23.591083558Z","hostname":"oxz_cockroachdb_a41aeb8f-293b-4abf-a847-99155ca70925","pid":10418}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:09:23.59473781Z","hostname":"oxz_cockroachdb_a41aeb8f-293b-4abf-a847-99155ca70925","pid":10418}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:09:23.598621186Z","hostname":"oxz_cockroachdb_a41aeb8f-293b-4abf-a847-99155ca70925","pid":10418,"static address":"fd00:1122:3344:101::4","data link":"\"oxControlService6\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:09:24.053417425Z","hostname":"oxz_cockroachdb_a41aeb8f-293b-4abf-a847-99155ca70925","pid":10418,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:09:24.060062Z","hostname":"oxz_cockroachdb_a41aeb8f-293b-4abf-a847-99155ca70925","pid":10418,"zonename":"\"oxz_cockroachdb_a41aeb8f-293b-4abf-a847-99155ca70925\""}
[ May 21 10:09:24 Method "start" exited with status 0. ]