[ May 21 10:09:59 Enabled. ]
[ May 21 10:09:59 Rereading configuration. ]
[ May 21 10:10:00 Rereading configuration. ]
[ May 21 10:10:03 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:10:03.367184126Z","hostname":"oxz_crucible_a682a1c5-a85c-41ac-80a8-7390ed538070","pid":22098,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:10:03.379841187Z","hostname":"oxz_crucible_a682a1c5-a85c-41ac-80a8-7390ed538070","pid":22098,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:10:03.392441217Z","hostname":"oxz_crucible_a682a1c5-a85c-41ac-80a8-7390ed538070","pid":22098}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:10:03.400148037Z","hostname":"oxz_crucible_a682a1c5-a85c-41ac-80a8-7390ed538070","pid":22098}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:10:03.405016026Z","hostname":"oxz_crucible_a682a1c5-a85c-41ac-80a8-7390ed538070","pid":22098,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:10:03.868425659Z","hostname":"oxz_crucible_a682a1c5-a85c-41ac-80a8-7390ed538070","pid":22098,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T10:10:03.880996818Z","hostname":"oxz_crucible_a682a1c5-a85c-41ac-80a8-7390ed538070","pid":22098,"zonename":"\"oxz_crucible_a682a1c5-a85c-41ac-80a8-7390ed538070\""}
[ May 21 10:10:03 Method "start" exited with status 0. ]