[ May 21 18:52:58 Enabled. ]
[ May 21 18:52:58 Rereading configuration. ]
[ May 21 18:53:00 Rereading configuration. ]
[ May 21 18:53:03 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T18:53:03.898842368Z","hostname":"oxz_oximeter_b7460ed1-1ffe-4f5e-80d4-3a42faf4f50f","pid":22889,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T18:53:03.907072169Z","hostname":"oxz_oximeter_b7460ed1-1ffe-4f5e-80d4-3a42faf4f50f","pid":22889,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T18:53:03.918311468Z","hostname":"oxz_oximeter_b7460ed1-1ffe-4f5e-80d4-3a42faf4f50f","pid":22889}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T18:53:03.924125878Z","hostname":"oxz_oximeter_b7460ed1-1ffe-4f5e-80d4-3a42faf4f50f","pid":22889}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T18:53:03.929138325Z","hostname":"oxz_oximeter_b7460ed1-1ffe-4f5e-80d4-3a42faf4f50f","pid":22889,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T18:53:04.396090806Z","hostname":"oxz_oximeter_b7460ed1-1ffe-4f5e-80d4-3a42faf4f50f","pid":22889,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T18:53:04.408870271Z","hostname":"oxz_oximeter_b7460ed1-1ffe-4f5e-80d4-3a42faf4f50f","pid":22889,"zonename":"\"oxz_oximeter_b7460ed1-1ffe-4f5e-80d4-3a42faf4f50f\""}
[ May 21 18:53:04 Method "start" exited with status 0. ]