[ May 21 20:13:14 Enabled. ]
[ May 21 20:13:14 Rereading configuration. ]
[ May 21 20:13:16 Rereading configuration. ]
[ May 21 20:13:18 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:18.783868262Z","hostname":"oxz_crucible_5b4c1ba3-c116-47dd-a501-c449233f5285","pid":21388,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:18.797651662Z","hostname":"oxz_crucible_5b4c1ba3-c116-47dd-a501-c449233f5285","pid":21388,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:18.812677539Z","hostname":"oxz_crucible_5b4c1ba3-c116-47dd-a501-c449233f5285","pid":21388}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:18.819785237Z","hostname":"oxz_crucible_5b4c1ba3-c116-47dd-a501-c449233f5285","pid":21388}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:18.827274271Z","hostname":"oxz_crucible_5b4c1ba3-c116-47dd-a501-c449233f5285","pid":21388,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:19.292083243Z","hostname":"oxz_crucible_5b4c1ba3-c116-47dd-a501-c449233f5285","pid":21388,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:19.303991247Z","hostname":"oxz_crucible_5b4c1ba3-c116-47dd-a501-c449233f5285","pid":21388,"zonename":"\"oxz_crucible_5b4c1ba3-c116-47dd-a501-c449233f5285\""}
[ May 21 20:13:19 Method "start" exited with status 0. ]