[ May 21 20:13:17 Enabled. ]
[ May 21 20:13:17 Rereading configuration. ]
[ May 21 20:13:19 Rereading configuration. ]
[ May 21 20:13:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:21.615755793Z","hostname":"oxz_oximeter_96c406d6-4223-490d-a785-1a78eecd0a17","pid":22624,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:21.628687731Z","hostname":"oxz_oximeter_96c406d6-4223-490d-a785-1a78eecd0a17","pid":22624,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:21.640082818Z","hostname":"oxz_oximeter_96c406d6-4223-490d-a785-1a78eecd0a17","pid":22624}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:21.647419389Z","hostname":"oxz_oximeter_96c406d6-4223-490d-a785-1a78eecd0a17","pid":22624}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:21.652993196Z","hostname":"oxz_oximeter_96c406d6-4223-490d-a785-1a78eecd0a17","pid":22624,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:22.114909409Z","hostname":"oxz_oximeter_96c406d6-4223-490d-a785-1a78eecd0a17","pid":22624,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T20:13:22.127142278Z","hostname":"oxz_oximeter_96c406d6-4223-490d-a785-1a78eecd0a17","pid":22624,"zonename":"\"oxz_oximeter_96c406d6-4223-490d-a785-1a78eecd0a17\""}
[ May 21 20:13:22 Method "start" exited with status 0. ]