[ May 21 22:28:01 Enabled. ]
[ May 21 22:28:01 Rereading configuration. ]
[ May 21 22:28:03 Rereading configuration. ]
[ May 21 22:28:06 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T22:28:06.350642155Z","hostname":"oxz_crucible_9ffd60d1-8ab9-4fb0-ab48-60bc921a7f51","pid":24040,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T22:28:06.359382029Z","hostname":"oxz_crucible_9ffd60d1-8ab9-4fb0-ab48-60bc921a7f51","pid":24040,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T22:28:06.375220441Z","hostname":"oxz_crucible_9ffd60d1-8ab9-4fb0-ab48-60bc921a7f51","pid":24040}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T22:28:06.381386203Z","hostname":"oxz_crucible_9ffd60d1-8ab9-4fb0-ab48-60bc921a7f51","pid":24040}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T22:28:06.387839874Z","hostname":"oxz_crucible_9ffd60d1-8ab9-4fb0-ab48-60bc921a7f51","pid":24040,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T22:28:06.847845173Z","hostname":"oxz_crucible_9ffd60d1-8ab9-4fb0-ab48-60bc921a7f51","pid":24040,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-21T22:28:06.860606149Z","hostname":"oxz_crucible_9ffd60d1-8ab9-4fb0-ab48-60bc921a7f51","pid":24040,"zonename":"\"oxz_crucible_9ffd60d1-8ab9-4fb0-ab48-60bc921a7f51\""}
[ May 21 22:28:06 Method "start" exited with status 0. ]