| 1 | | [ May 23 04:39:49 Enabled. ] |
| 2 | | [ May 23 04:39:49 Rereading configuration. ] |
| 3 | | [ May 23 04:39:50 Rereading configuration. ] |
| 4 | | [ May 23 04:39:51 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-05-23T04:39:51.053Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService4
|
| 7 | 2026-05-23T04:39:51.058Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService4
|
| 8 | 2026-05-23T04:39:51.064Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-05-23T04:39:51.067Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-05-23T04:39:51.070Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService4"
static address = fd00:1122:3344:101::1b
|
| 11 | 2026-05-23T04:39:51.524Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-05-23T04:39:51.530Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_ntp_25db01ce-77bf-45b6-bd19-ff92ae729135"
|
| 13 | | [ May 23 04:39:51 Method "start" exited with status 0. ] |