[ May 23 16:08:10 Enabled. ]
[ May 23 16:08:10 Rereading configuration. ]
[ May 23 16:08:11 Rereading configuration. ]
[ May 23 16:08:14 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-23T16:08:14.429908845Z","hostname":"oxz_crucible_cb5dfdd9-b97b-4eec-9284-cf2b07088e1b","pid":21685,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-23T16:08:14.438223181Z","hostname":"oxz_crucible_cb5dfdd9-b97b-4eec-9284-cf2b07088e1b","pid":21685,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-23T16:08:14.453113836Z","hostname":"oxz_crucible_cb5dfdd9-b97b-4eec-9284-cf2b07088e1b","pid":21685}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-23T16:08:14.458244931Z","hostname":"oxz_crucible_cb5dfdd9-b97b-4eec-9284-cf2b07088e1b","pid":21685}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-23T16:08:14.466165836Z","hostname":"oxz_crucible_cb5dfdd9-b97b-4eec-9284-cf2b07088e1b","pid":21685,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-23T16:08:14.925774737Z","hostname":"oxz_crucible_cb5dfdd9-b97b-4eec-9284-cf2b07088e1b","pid":21685,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-23T16:08:14.938017576Z","hostname":"oxz_crucible_cb5dfdd9-b97b-4eec-9284-cf2b07088e1b","pid":21685,"zonename":"\"oxz_crucible_cb5dfdd9-b97b-4eec-9284-cf2b07088e1b\""}
[ May 23 16:08:14 Method "start" exited with status 0. ]