[ May 27 02:39:26 Enabled. ]
[ May 27 02:39:26 Rereading configuration. ]
[ May 27 02:39:27 Rereading configuration. ]
[ May 27 02:39:30 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:30.973791215Z","hostname":"oxz_crucible_bf94ab1c-fae7-4b61-b9bb-42025ff72f63","pid":21702,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:30.982267157Z","hostname":"oxz_crucible_bf94ab1c-fae7-4b61-b9bb-42025ff72f63","pid":21702,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:30.997645091Z","hostname":"oxz_crucible_bf94ab1c-fae7-4b61-b9bb-42025ff72f63","pid":21702}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.002724786Z","hostname":"oxz_crucible_bf94ab1c-fae7-4b61-b9bb-42025ff72f63","pid":21702}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.008874211Z","hostname":"oxz_crucible_bf94ab1c-fae7-4b61-b9bb-42025ff72f63","pid":21702,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.469414855Z","hostname":"oxz_crucible_bf94ab1c-fae7-4b61-b9bb-42025ff72f63","pid":21702,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.482593979Z","hostname":"oxz_crucible_bf94ab1c-fae7-4b61-b9bb-42025ff72f63","pid":21702,"zonename":"\"oxz_crucible_bf94ab1c-fae7-4b61-b9bb-42025ff72f63\""}
[ May 27 02:39:31 Method "start" exited with status 0. ]