[ May 27 02:39:26 Enabled. ]
[ May 27 02:39:26 Rereading configuration. ]
[ May 27 02:39:28 Rereading configuration. ]
[ May 27 02:39:31 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.188986221Z","hostname":"oxz_oximeter_a9d3a84e-a7d8-4943-9da6-3af3378f80c6","pid":21846,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.197814075Z","hostname":"oxz_oximeter_a9d3a84e-a7d8-4943-9da6-3af3378f80c6","pid":21846,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.210738084Z","hostname":"oxz_oximeter_a9d3a84e-a7d8-4943-9da6-3af3378f80c6","pid":21846}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.217053037Z","hostname":"oxz_oximeter_a9d3a84e-a7d8-4943-9da6-3af3378f80c6","pid":21846}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.223800794Z","hostname":"oxz_oximeter_a9d3a84e-a7d8-4943-9da6-3af3378f80c6","pid":21846,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.686975415Z","hostname":"oxz_oximeter_a9d3a84e-a7d8-4943-9da6-3af3378f80c6","pid":21846,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T02:39:31.700550631Z","hostname":"oxz_oximeter_a9d3a84e-a7d8-4943-9da6-3af3378f80c6","pid":21846,"zonename":"\"oxz_oximeter_a9d3a84e-a7d8-4943-9da6-3af3378f80c6\""}
[ May 27 02:39:31 Method "start" exited with status 0. ]