[ May 27 21:01:37 Enabled. ]
[ May 27 21:01:37 Rereading configuration. ]
[ May 27 21:01:38 Rereading configuration. ]
[ May 27 21:01:40 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T21:01:41.089317265Z","hostname":"oxz_crucible_5124a06e-4080-4494-85ff-28f78b3cc269","pid":25612,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T21:01:41.100073853Z","hostname":"oxz_crucible_5124a06e-4080-4494-85ff-28f78b3cc269","pid":25612,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T21:01:41.114373789Z","hostname":"oxz_crucible_5124a06e-4080-4494-85ff-28f78b3cc269","pid":25612}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T21:01:41.12071779Z","hostname":"oxz_crucible_5124a06e-4080-4494-85ff-28f78b3cc269","pid":25612}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T21:01:41.125976425Z","hostname":"oxz_crucible_5124a06e-4080-4494-85ff-28f78b3cc269","pid":25612,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T21:01:41.58702865Z","hostname":"oxz_crucible_5124a06e-4080-4494-85ff-28f78b3cc269","pid":25612,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-27T21:01:41.600175528Z","hostname":"oxz_crucible_5124a06e-4080-4494-85ff-28f78b3cc269","pid":25612,"zonename":"\"oxz_crucible_5124a06e-4080-4494-85ff-28f78b3cc269\""}
[ May 27 21:01:41 Method "start" exited with status 0. ]