[ May 28 17:30:49 Enabled. ]
[ May 28 17:30:49 Rereading configuration. ]
[ May 28 17:30:50 Rereading configuration. ]
[ May 28 17:30:55 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:30:55.533227094Z","hostname":"oxz_crucible_f18f4854-2d61-4111-83d7-2fa2e1412a33","pid":28950,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:30:55.540369025Z","hostname":"oxz_crucible_f18f4854-2d61-4111-83d7-2fa2e1412a33","pid":28950,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:30:55.549035053Z","hostname":"oxz_crucible_f18f4854-2d61-4111-83d7-2fa2e1412a33","pid":28950}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:30:55.553034824Z","hostname":"oxz_crucible_f18f4854-2d61-4111-83d7-2fa2e1412a33","pid":28950}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:30:55.557592829Z","hostname":"oxz_crucible_f18f4854-2d61-4111-83d7-2fa2e1412a33","pid":28950,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:30:56.036263865Z","hostname":"oxz_crucible_f18f4854-2d61-4111-83d7-2fa2e1412a33","pid":28950,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:30:56.057588213Z","hostname":"oxz_crucible_f18f4854-2d61-4111-83d7-2fa2e1412a33","pid":28950,"zonename":"\"oxz_crucible_f18f4854-2d61-4111-83d7-2fa2e1412a33\""}
[ May 28 17:30:56 Method "start" exited with status 0. ]