[ May 28 17:32:08 Enabled. ]
[ May 28 17:32:08 Rereading configuration. ]
[ May 28 17:32:09 Rereading configuration. ]
[ May 28 17:32:11 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:32:12.042576796Z","hostname":"oxz_crucible_2cf0a46e-047b-4fa7-bd0e-be36a38cbf67","pid":25445,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:32:12.052050263Z","hostname":"oxz_crucible_2cf0a46e-047b-4fa7-bd0e-be36a38cbf67","pid":25445,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:32:12.063383752Z","hostname":"oxz_crucible_2cf0a46e-047b-4fa7-bd0e-be36a38cbf67","pid":25445}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:32:12.068779881Z","hostname":"oxz_crucible_2cf0a46e-047b-4fa7-bd0e-be36a38cbf67","pid":25445}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:32:12.075396342Z","hostname":"oxz_crucible_2cf0a46e-047b-4fa7-bd0e-be36a38cbf67","pid":25445,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:32:12.532533398Z","hostname":"oxz_crucible_2cf0a46e-047b-4fa7-bd0e-be36a38cbf67","pid":25445,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:32:12.542198869Z","hostname":"oxz_crucible_2cf0a46e-047b-4fa7-bd0e-be36a38cbf67","pid":25445,"zonename":"\"oxz_crucible_2cf0a46e-047b-4fa7-bd0e-be36a38cbf67\""}
[ May 28 17:32:12 Method "start" exited with status 0. ]