[ May 28 17:29:25 Enabled. ]
[ May 28 17:29:25 Rereading configuration. ]
[ May 28 17:29:25 Rereading configuration. ]
[ May 28 17:29:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService3 -s fd00:1122:3344:3::1 -g fd00:1122:3344:3::2"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:29:26.238144562Z","hostname":"oxz_internal_dns_c022c014-a274-4745-8d80-062387f821a9","pid":5218,"datalink":"oxControlService3"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:29:26.244205843Z","hostname":"oxz_internal_dns_c022c014-a274-4745-8d80-062387f821a9","pid":5218,"datalink":"oxControlService3"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:29:26.273239777Z","hostname":"oxz_internal_dns_c022c014-a274-4745-8d80-062387f821a9","pid":5218}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:29:26.277302894Z","hostname":"oxz_internal_dns_c022c014-a274-4745-8d80-062387f821a9","pid":5218}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:29:26.280945985Z","hostname":"oxz_internal_dns_c022c014-a274-4745-8d80-062387f821a9","pid":5218,"static address":"fd00:1122:3344:3::1","data link":"\"oxControlService3\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:29:26.735258994Z","hostname":"oxz_internal_dns_c022c014-a274-4745-8d80-062387f821a9","pid":5218,"gateway":"fd00:1122:3344:3::2"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T17:29:26.741898795Z","hostname":"oxz_internal_dns_c022c014-a274-4745-8d80-062387f821a9","pid":5218,"zonename":"\"oxz_internal_dns_c022c014-a274-4745-8d80-062387f821a9\""}
[ May 28 17:29:26 Method "start" exited with status 0. ]