[ May 29 00:01:49 Enabled. ]
[ May 29 00:01:49 Rereading configuration. ]
[ May 29 00:01:52 Rereading configuration. ]
[ May 29 00:01:58 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.440743727Z","hostname":"oxz_crucible_3ad49a31-1840-4c4f-bdc4-47f54e96bc6a","pid":26063,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.443454149Z","hostname":"oxz_crucible_3ad49a31-1840-4c4f-bdc4-47f54e96bc6a","pid":26063,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.453292239Z","hostname":"oxz_crucible_3ad49a31-1840-4c4f-bdc4-47f54e96bc6a","pid":26063}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.458208553Z","hostname":"oxz_crucible_3ad49a31-1840-4c4f-bdc4-47f54e96bc6a","pid":26063}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.462913335Z","hostname":"oxz_crucible_3ad49a31-1840-4c4f-bdc4-47f54e96bc6a","pid":26063,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.926025152Z","hostname":"oxz_crucible_3ad49a31-1840-4c4f-bdc4-47f54e96bc6a","pid":26063,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.941573118Z","hostname":"oxz_crucible_3ad49a31-1840-4c4f-bdc4-47f54e96bc6a","pid":26063,"zonename":"\"oxz_crucible_3ad49a31-1840-4c4f-bdc4-47f54e96bc6a\""}
[ May 29 00:01:58 Method "start" exited with status 0. ]