[ May 29 00:01:50 Enabled. ]
[ May 29 00:01:50 Rereading configuration. ]
[ May 29 00:01:53 Rereading configuration. ]
[ May 29 00:01:58 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.661234727Z","hostname":"oxz_crucible_5b63b490-ff84-4b49-8982-acf82a35eaf0","pid":26150,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.663980619Z","hostname":"oxz_crucible_5b63b490-ff84-4b49-8982-acf82a35eaf0","pid":26150,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.672414357Z","hostname":"oxz_crucible_5b63b490-ff84-4b49-8982-acf82a35eaf0","pid":26150}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.676802794Z","hostname":"oxz_crucible_5b63b490-ff84-4b49-8982-acf82a35eaf0","pid":26150}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:58.681835641Z","hostname":"oxz_crucible_5b63b490-ff84-4b49-8982-acf82a35eaf0","pid":26150,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:59.219336741Z","hostname":"oxz_crucible_5b63b490-ff84-4b49-8982-acf82a35eaf0","pid":26150,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T00:01:59.286093048Z","hostname":"oxz_crucible_5b63b490-ff84-4b49-8982-acf82a35eaf0","pid":26150,"zonename":"\"oxz_crucible_5b63b490-ff84-4b49-8982-acf82a35eaf0\""}
[ May 29 00:01:59 Method "start" exited with status 0. ]