[ May 28 23:59:35 Enabled. ]
[ May 28 23:59:35 Rereading configuration. ]
[ May 28 23:59:35 Rereading configuration. ]
[ May 28 23:59:36 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService3 -s fd00:1122:3344:2::1 -g fd00:1122:3344:2::2"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T23:59:36.297909822Z","hostname":"oxz_internal_dns_7c7d1590-7ce7-4782-9faa-1d44ed1a00a7","pid":5295,"datalink":"oxControlService3"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T23:59:36.303280854Z","hostname":"oxz_internal_dns_7c7d1590-7ce7-4782-9faa-1d44ed1a00a7","pid":5295,"datalink":"oxControlService3"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T23:59:36.30959434Z","hostname":"oxz_internal_dns_7c7d1590-7ce7-4782-9faa-1d44ed1a00a7","pid":5295}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T23:59:36.312989102Z","hostname":"oxz_internal_dns_7c7d1590-7ce7-4782-9faa-1d44ed1a00a7","pid":5295}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T23:59:36.31548294Z","hostname":"oxz_internal_dns_7c7d1590-7ce7-4782-9faa-1d44ed1a00a7","pid":5295,"static address":"fd00:1122:3344:2::1","data link":"\"oxControlService3\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T23:59:36.769381086Z","hostname":"oxz_internal_dns_7c7d1590-7ce7-4782-9faa-1d44ed1a00a7","pid":5295,"gateway":"fd00:1122:3344:2::2"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-28T23:59:36.775061323Z","hostname":"oxz_internal_dns_7c7d1590-7ce7-4782-9faa-1d44ed1a00a7","pid":5295,"zonename":"\"oxz_internal_dns_7c7d1590-7ce7-4782-9faa-1d44ed1a00a7\""}
[ May 28 23:59:36 Method "start" exited with status 0. ]